[PATCH v3 06/11] thermal: armada: Add support for Armada CP110
From: Miquel Raynal <hidden>
Date: 2017-12-14 10:30:06
Also in:
linux-devicetree, linux-pm
Subsystem:
marvell mvebu thermal driver, the rest, thermal · Maintainers:
Miquel Raynal, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
From: Baruch Siach <baruch@tkos.co.il> The CP110 component is integrated in the Armada 8k and 7k lines of processors. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [[off-list ref]: renamed the register pointers] Signed-off-by: Miquel Raynal <redacted> --- drivers/thermal/armada_thermal.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 279d01937bb8..f5c911524656 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c@@ -37,7 +37,6 @@ #define A375_UNIT_CONTROL_MASK 0x7 #define A375_READOUT_INVERT BIT(15) #define A375_HW_RESETn BIT(8) -#define A380_HW_RESET BIT(8) /* Legacy bindings */ #define LEGACY_CONTROL_MEM_LEN 0x4
@@ -52,6 +51,10 @@ #define CONTROL0_TSEN_RESET BIT(1) #define CONTROL0_TSEN_ENABLE BIT(2) +/* EXT_TSEN refers to the external temperature sensors, out of the AP */ +#define CONTROL1_EXT_TSEN_SW_RESET BIT(7) +#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) + struct armada_thermal_data; /* Marvell EBU Thermal Sensor Dev Structure */
@@ -153,11 +156,10 @@ static void armada380_init_sensor(struct platform_device *pdev, u32 reg = readl_relaxed(priv->control1); /* Reset hardware once */ - if (!(reg & A380_HW_RESET)) { - reg |= A380_HW_RESET; - writel(reg, priv->control1); - msleep(10); - } + reg |= CONTROL1_EXT_TSEN_HW_RESETn; + reg &= ~CONTROL1_EXT_TSEN_SW_RESET; + writel(reg, priv->control1); + msleep(10); } static void armada_ap806_init_sensor(struct platform_device *pdev,
@@ -280,6 +282,18 @@ static const struct armada_thermal_data armada_ap806_data = { .signed_sample = true, }; +static const struct armada_thermal_data armada_cp110_data = { + .is_valid = armada_is_valid, + .init_sensor = armada380_init_sensor, + .is_valid_bit = BIT(10), + .temp_shift = 0, + .temp_mask = 0x3ff, + .coef_b = 1172499100UL, + .coef_m = 2000096UL, + .coef_div = 4201, + .inverted = true, +}; + static const struct of_device_id armada_thermal_id_table[] = { { .compatible = "marvell,armadaxp-thermal",
@@ -302,6 +316,10 @@ static const struct of_device_id armada_thermal_id_table[] = { .data = &armada_ap806_data, }, { + .compatible = "marvell,armada-cp110-thermal", + .data = &armada_cp110_data, + }, + { /* sentinel */ }, };
--
2.11.0