[PATCH 03/14] dt-bindings: iio: add binding support for iio trigger provider/consumer

Add bindings for producer/consumer for iio triggers.

Similar with iio channels, the iio triggers can be connected between drivers:
one driver will be a producer by registering iio triggers, and another driver
will connect as a consumer.

Signed-off-by: Eugen Hristev <redacted>
---
 .../devicetree/bindings/iio/iio-bindings.txt       | 52 +++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index 68d6f8c..d861f0df 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt

@@ -11,6 +11,10 @@ value of a #io-channel-cells property in the IIO provider node.
 
 [1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
 
+Moreover, the provider can have a set of triggers that can be attached to
+from the consumer drivers.
+
+
 ==IIO providers==
 
 Required properties:

@@ -18,6 +22,11 @@ Required properties:
 		   with a single IIO output and 1 for nodes with multiple
 		   IIO outputs.
 
+Optional properties:
+#io-trigger-cells: Number of cells for the IIO trigger specifier. Typically 0
+		   for nodes with a single IIO trigger and 1 for nodes with
+		   multiple IIO triggers.
+
 Example for a simple configuration with no trigger:
 
 	adc: voltage-sensor at 35 {

@@ -26,7 +35,7 @@ Example for a simple configuration with no trigger:
 		#io-channel-cells = <1>;
 	};
 
-Example for a configuration with trigger:
+Example for a configuration with channels provided by trigger:
 
 	adc at 35 {
 		compatible = "some-vendor,some-adc";

@@ -42,6 +51,17 @@ Example for a configuration with trigger:
 		};
 	};
 
+Example for a configuration for a trigger provider:
+
+	adc: sensor-with-trigger at 35 {
+		compatible = "some-vendor,some-adc";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+		#io-trigger-cells = <1>;
+		/* other properties */
+	};
+
+
 ==IIO consumers==
 
 Required properties:

@@ -61,16 +81,38 @@ io-channel-ranges:
 		IIO channels from this node. Useful for bus nodes to provide
 		and IIO channel to their children.
 
+io-triggers:	List of phandle and IIO specifier pairs, one pair
+		for each trigger input to the device. Note: if the
+		IIO trigger provider specifies '0' for #io-trigger-cells,
+		then only the phandle portion of the pair will appear.
+
+io-trigger-names:
+		List of IIO trigger input name strings sorted in the same
+		order as the io-triggers property. Consumers drivers
+		will use io-trigger-names to match IIO trigger input names
+		with IIO specifiers.
+
+io-trigger-ranges:
+		Empty property indicating that child nodes can inherit named
+		IIO triggers from this node. Useful for bus nodes to provide
+		IIO triggers to their children.