Hi Philipp,

On Tue, Dec 19, 2017 at 09:07:42AM +0100, Philipp Rossak wrote:

This patch updates the sunxi-ir driver to set the base clock frequency from
devicetree.

This is necessary since there are different ir receivers on the
market, that operate with different frequencies. So this value could be
set if the attached ir receiver needs a different base clock frequency,
than the default 8 MHz.

Signed-off-by: Philipp Rossak <redacted>

feel free to add

Reviewed-by: Andi Shyti <redacted>

Andi