[PATCH 5/5] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller
flat view
From: Chen-Yu Tsai <hidden>
Date: 2017-12-18 03:30:51
Also in:
linux-devicetree, linux-media, lkml
On Mon, Dec 18, 2017 at 6:45 AM, Philipp Rossak [off-list ref] wrote:
The Bananapi M3 has an onboard IR receiver. This enables the onboard IR receiver subnode. Other than the other IR receivers this one needs a base clock frequency
Unlike the other...
quoted hunk ↗ jump to hunk
of 3000000 Hz (3 MHz), to be able to work. Signed-off-by: Philipp Rossak <redacted> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++ 1 file changed, 7 insertions(+)diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 6550bf0e594b..2bf25ca64133 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts@@ -100,6 +100,13 @@ status = "okay"; }; +&ir {
See my other reply about the name. Otherwise, Acked-by: Chen-Yu Tsai <redacted>
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&mdio {
rgmii_phy: ethernet-phy at 1 {
compatible = "ethernet-phy-ieee802.3-c22";
--
2.11.0