[PATCH v7 0/6] add clk controller driver for Meson-AXG SoC

Jerome Brunet [off-list ref] writes:

On Mon, 2017-12-11 at 22:13 +0800, Yixun Lan wrote:

quoted

Qiufang Dai (3):
  clk: meson-axg: add clocks dt-bindings required header
  clk: meson-axg: add clock controller drivers
  arm64: dts: meson-axg: add clock DT info for Meson AXG SoC

Yixun Lan (3):
  clk: meson: make the spinlock naming more specific
  dt-bindings: clock: add compatible variant for the Meson-AXG
  arm64: dts: meson-axg: switch uart_ao clock to CLK81

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   7 +-
 arch/arm64/Kconfig.platforms                       |   1 +
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts     |   2 +
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi         |  19 +-
 drivers/clk/meson/Kconfig                          |   8 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/axg.c                            | 936 +++++++++++++++++++++
 drivers/clk/meson/axg.h                            | 126 +++
 drivers/clk/meson/clkc.h                           |   2 +-
 drivers/clk/meson/gxbb.c                           | 112 +--
 drivers/clk/meson/meson8b.c                        |  24 +-
 include/dt-bindings/clock/axg-clkc.h               |  71 ++
 12 files changed, 1234 insertions(+), 75 deletions(-)
 create mode 100644 drivers/clk/meson/axg.c
 create mode 100644 drivers/clk/meson/axg.h
 create mode 100644 include/dt-bindings/clock/axg-clkc.h

Kevin, 

I took the first 4 patches through clk-meson. I left the last 2 for you.

I have applied the DT bindings update separately.
Let me know if you have dependency on these new bindings and need a tag.

Yes, I will need a tag on the headers since both the "switch uart_ao"
patch and a subsequent patch to add DT for SPICC are using new clock
IDs.

Thanks,

Kevin