[PATCH v3 2/2] ARM64: dts: meson-axg: enable ethernet for A113D S400 board
flat view
STALE3229d
SUPERSEDED: 1 (0M)
From: Yixun Lan <hidden>
Date: 2017-12-15 02:10:04
Also in:
linux-amlogic, linux-devicetree, lkml, netdev
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
Revision v3 of 2 in this series; 1 review trailer.
Revisions (2)
- v3 current
- v4 [diff vs current]
This is tested in the S400 dev board which use a RTL8211F PHY, and the pins connect to the 'eth_rgmii_y_pins' group. Reviewed-by: Neil Armstrong <redacted> Signed-off-by: Yixun Lan <redacted> --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..b8c4f1913d28 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts@@ -20,3 +20,10 @@ &uart_AO { status = "okay"; }; + +ðmac { + status = "okay"; + phy-mode = "rgmii"; + pinctrl-0 = <ð_rgmii_y_pins>; + pinctrl-names = "default"; +};
--
2.15.1