Thread (15 messages) 15 messages, 3 authors, 2017-12-08

[PATCH v4 4/8] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource

From: j-keerthy@ti.com (Keerthy)
Date: 2017-12-08 14:32:20
Also in: linux-omap, linux-pwm, lkml


On Friday 08 December 2017 09:25 AM, Keerthy wrote:

On Thursday 07 December 2017 04:24 PM, Daniel Lezcano wrote:
quoted
On 01/12/2017 06:16, Keerthy wrote:
quoted
Move the dmtimer driver out of plat-omap to clocksource.
So that non-omap devices also could use this.

No Code changes done to the driver file.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <redacted>
---

Changes in v3:

  * Added Sebastian's Reviewed-by.

Changes in v2:

  * No code changes in this v2 version. Only enhanced patch
    statistics for renames.

 arch/arm/plat-omap/Kconfig                            | 6 ------
 arch/arm/plat-omap/Makefile                           | 1 -
 drivers/clocksource/Kconfig                           | 6 ++++++
 drivers/clocksource/Makefile                          | 1 +
 {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c | 0
 5 files changed, 7 insertions(+), 7 deletions(-)
 rename {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c (100%)
Take the opportunity to rename it timer-dm.c
okay.
quoted
quoted
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7276afe..afc1a1d 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 	help
 	  PPA routine service ID for setting L2 auxiliary control register.
 
-config OMAP_DM_TIMER
-	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
-	help
-	 Select this option if you want to use OMAP Dual-Mode timers.
-
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
 	depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 47e1867..7215ada 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
 
 # omap_device support (OMAP2+ only at the moment)
 
-obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88..4da66cf 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -46,6 +46,12 @@ config DIGICOLOR_TIMER
 	help
 	  Enables the support for the digicolor timer driver.
 
+config OMAP_DM_TIMER
+	bool "Use dual-mode timer"
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	help
+	 Select this option if you want to use Dual-Mode timers.
+
So in the clocksource directory the rule is the following:

The config option is silent except if COMPILE_TEST is set.

It is the Kconfig's platform which select the driver so there is no deps
on the ARCH.
Okay understood.
Tony,

The driver requirements force me to remove all ARCH specific #ifdef in
Patch #2. I will reduce that patch to a comment.

Hope that is okay.

Regards,
Keerthy
quoted
config OMAP_DM_TIMER
	bool "Use dual-mode timer" if COMPILE_TEST
	help
	 Select this option if you want to use Dual-Mode timers.

Here you will have to make sure the driver compiles on x86.
Okay. I will check that in my next version.

Thanks for reviewing!
quoted
quoted
 config DW_APB_TIMER
 	bool "DW APB timer driver" if COMPILE_TEST
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1..b077076 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
 obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
+obj-$(CONFIG_OMAP_DM_TIMER)	+= dmtimer.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/dmtimer.c
similarity index 100%
rename from arch/arm/plat-omap/dmtimer.c
rename to drivers/clocksource/dmtimer.c
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help