[PATCH v3 11/12] arm64: dts: rockchip: add rx0 mipi-phy for rk3399
From: jacob-chen@iotwrt.com (Jacob Chen)
Date: 2017-12-06 11:21:20
Also in:
linux-devicetree, linux-media, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Shunqian Zheng <zhengsq@rock-chips.com> It's a Designware MIPI D-PHY, used for ISP0 in rk3399. Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Signed-off-by: Jacob Chen <redacted> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 66a912fab5dd..a65b110afaf3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi@@ -1292,6 +1292,17 @@ status = "disabled"; }; + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + bus-width = <4>; + status = "disabled"; + }; + u2phy0: usb2-phy at e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>;
--
2.15.0