[PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property
STALE3208d
REVIEWED: 6 (6M)
From: o.rempel@pengutronix.de (Oleksij Rempel)
Date: 2017-12-06 07:24:57
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Stephen Boyd, Brian Masney, Jerome Brunet, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v6 of 10 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (10)
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index aa0a4d423ef5..9fed9dfe4a23 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt@@ -6,6 +6,14 @@ Required properties: - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> +Optional properties: +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal + on power off. + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h for the full list of i.MX6 Quad and DualLite clock IDs.
--
2.11.0