Hi all, 

Juergen It won't work ( as it is) , registers are not on the correct offsets and some bits are not on the same positions ( for the IMX53)
This driver will not work for the INTERNAL-RTC ( rtc into the IMX53), and will never have worked ( on IMX53). 
I can confirm, it might work for some other variant of the RTC, but it will not do what we all expected for the RTC located into IMX53!

( not sure my previous mail got to the destination)

Best Regards
Noel

quoted

quoted

Juergen can confirm, but it seems the dryice driver was only used on

mx25 in mainline.

quoted

Ok, that would explain it.

Yes. The development was made on an i.MX25. But currently I have an i.MX53 on my desk here and could test...

jb

quoted

quoted

-----Original Message-----
From: Vellemans, Noel 
Sent: Tuesday, November 14, 2017 11:30 AM
To: 'Fabio Estevam'
Cc: Patrick Br?nn; Alexandre Belloni; linux-arm-kernel at lists.infradead.org; linux-rtc at vger.kernel.org
Subject: RE: DryIce , RTC not working on imx53.

Hi Fabio

It's been a while... ( but I'm quite sure), if you look closely at the register defines ( into the DRYICE-driver-code) then you will notice... that SOME registers offsets are correct , but others are not matching the INTERNAL rtc of the IMX53.

When I noticed that ( I skipped RTC driver functionality, under release pressure, I had still many items to test on those kernel , and I was under release pressure.. so I removed RTC for the time being.)

{ you can get basic RTC , timer only , no alarms/events working... by commenting a lot of things out,  but .. I decided to solve this later the correct way,  when I find some time  ( and to report back when solved, didn't want to bother many people, or otherwise said didn't want make too many noise .... ( because rtc is not critical in my application ) }

This driver will not work for the INTERNAL-RTC ( rtc into the IMX53), and will never have worked, I can confirm this, it might have worked for some other variant of the RTC, but it will not do what we all expected for the RTC located into IMX53!


Regards
Noel

PS: Just for info,  at this time I'm investigating a NOT booting problem .. and .. it?s a hard one ( keeps me busy for some day's already ... let's say in a 500 boots there is one issue where the 'kernel' locks-up in a 
very very early stage.. (into the first mili-sec of the boot it hangs, some-where around IRQ-initialization .. all blocks , before CPU-identification... no clue yet where exactly..!) 
{ it's only happening in latest kernels 4.4.x / 4.1x.x , older 2.6.35 do not suffer this none boot behavior ( on the same hardware) , so .. digging / debugging / printing.. :-) at this time }