[PATCH 01/13] ARM: dts: imx6qdl: SolidRun: remove redundant regulators node

On Mon, Nov 27, 2017 at 06:15:25PM -0200, Fabio Estevam wrote:

On Mon, Nov 27, 2017 at 2:52 PM, Russell King
[off-list ref] wrote:

quoted

-               };
+       reg_usbh1_vbus: usb-h1-vbus {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 0 0>;

gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; would be easier to read.

quoted

+       reg_usbotg_vbus: usb-otg-vbus {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio3 22 0>;

Ditto.

quoted

+       reg_brcm: brcm-reg {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio3 19 0>;

Ditto.

Again, this is not new code, such a change should be a separate patch,
maybe even separate from this series.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up