Hi Yixun,

On Mon, Nov 6, 2017 at 10:31 AM, Yixun Lan [off-list ref] wrote:

Hi Neil:


On 11/06/17 16:57, Neil Armstrong wrote:

quoted

On 06/11/2017 08:52, Yixun Lan wrote:

quoted

According to the datasheet, in Meson-GXBB/GXL series,
The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22],
while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10].

Test passed at gxl_skt dev board.

Tested-by: Xingyu Chen <redacted>
Signed-off-by: Yixun Lan <redacted>

---
I think this error was introduced by a copy & paste from meson8 code?
and we didn't notice them due to the SANA clock is also enabled by
DTS (so SAR_ADC works fine)?
---
 drivers/clk/meson/gxbb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index b2d1e8ed7152..92168348ffa6 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c

@@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6);
 static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7);
 static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8);
 static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9);
-static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10);
 static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11);
 static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12);
 static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13);

@@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
 static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11);
 static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12);
 static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15);
-static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22);
+static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22);
 static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25);
 static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
 static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29);

Hi Yixun,

Can you precise how it affects the saradc driver ? from the DT and clk PoV ?

the saradc module doesn't require sana clock (it's irrelvevant), we will
send a patchset v3 to address this.

is the SANA clock irrelevant for the SAR ADC on all SoCs (even
Meson8/Meson8b/Meson8m2) or just on the GX SoCs?
also, do you know what "SANA" stands for?


Regards
Martin