[PATCH 1/3] arm64: dts: actions: add s900 clock controller nodes
From: robh@kernel.org (Rob Herring)
Date: 2017-11-02 00:06:20
Also in:
linux-clk, linux-devicetree, lkml
On Wed, Nov 01, 2017 at 01:24:21AM +0530, Manivannan Sadhasivam wrote:
quoted hunk ↗ jump to hunk
This patch adds clock controller nodes for Actions Semi s900 SoC Signed-off-by: Manivannan Sadhasivam <redacted> --- arch/arm64/boot/dts/actions/s900.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index 11406f6..c099ef1 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi@@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/actions,s900-clock.h> / { compatible = "actions,s900";@@ -88,6 +89,24 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + diff_24M: diff_24M { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + };
These 2 are inputs to the clock ctrlr? The clock controller should have a clocks property then.
+
+ clock: clock-controller at e0160000 {
+ compatible = "actions,s900-clock";
+ reg = <0 0xe0160000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
--
2.7.4