[GIT PULL] ARM: mvebu: dt64 for v4.15 (#1)

Hi,


This email was sent in double because I though I had an issue with the
first send. Indeed an other email sent 15 min later to the same mailing
list showed up on the mailing list whereas this one was not there after
half an hour.

I don't understand what happened. Sorry for the noise,

Gregory


 
 On ven., oct. 20 2017, Gregory CLEMENT [off-list ref] wrote:

Hi,

Here is the first pull request for dt64 for mvebu for v4.15.

Gregory

The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:

  Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)

are available in the git repository at:

  git://git.infradead.org/linux-mvebu.git tags/mvebu-dt64-4.15-1

for you to fetch changes up to c4e3bf290c3089502ee33e25795075b86fe9a449:

  arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP (2017-10-12 15:53:47 +0200)

----------------------------------------------------------------
mvebu dt64 for 4.15 (part 1)

On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1

On Armada 37xx:
 - Fix UART register size
 - Add vmmc regulator for SD on 3720 DB

----------------------------------------------------------------
Antoine Tenart (8):
      arm64: dts: marvell: extend the cp110 syscon register area length
      arm64: dts: marvell: add comphy nodes on cp110 master and slave
      arm64: dts: marvell: cp110: add PPv2 port interrupts
      arm64: dts: marvell: 37xx: remove empty line
      arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
      arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
      arm64: dts: marvell: 7040-db: enable the SFP port
      arm64: dts: marvell: 8040-db: enable the SFP ports

Baruch Siach (1):
      arm64: dts: marvell: enable AP806 watchdog

Christine Gharzuzi (1):
      arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

Gregory CLEMENT (4):
      arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
      arm64: dts: marvell: add NAND support on the 7040-DB board
      arm64: dts: marvell: 7040-db: Document the gpio expander
      arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP

Thomas Petazzoni (2):
      arm64: dts: marvell: add UART muxing on Armada 7K/8K
      arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB

allen yan (1):
      arm64: dts: marvell: Fix A37xx UART0 register size

 .../devicetree/bindings/serial/mvebu-uart.txt      |  2 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts     | 11 ++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  3 +-
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 55 +++++++++++++++++++-
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 +++++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 57 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts  | 11 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 11 ++++
 .../boot/dts/marvell/armada-cp110-master.dtsi      | 59 +++++++++++++++++++---
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 58 ++++++++++++++++++---
 10 files changed, 261 insertions(+), 20 deletions(-)

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com