[PATCH 2/6] bcm63xx_enet: do not write to random DMA channel on BCM6345
From: jonas.gorski@gmail.com (Jonas Gorski)
Date: 2017-10-01 11:02:16
Also in:
netdev
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The DMA controller regs actually point to DMA channel 0, so the write to ENETDMA_CFG_REG will actually modify a random DMA channel. Since DMA controller registers do not exist on BCM6345, guard the write with the usual check for dma_has_sram. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index a45ec97b5b1e..a1e1e12e187a 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c@@ -1062,7 +1062,8 @@ static int bcm_enet_open(struct net_device *dev) val = enet_readl(priv, ENET_CTL_REG); val |= ENET_CTL_ENABLE_MASK; enet_writel(priv, val, ENET_CTL_REG); - enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); + if (priv->dma_has_sram) + enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); enet_dmac_writel(priv, priv->dma_chan_en_mask, ENETDMAC_CHANCFG, priv->rx_chan);
--
2.13.2