[PATCH v3 6/6] ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property
From: shawnguo@kernel.org (Shawn Guo)
Date: 2017-10-23 00:38:10
Also in:
linux-devicetree
On Fri, Oct 20, 2017 at 01:48:27PM -0200, Marco Franchi wrote:
The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips at 60000000/ethernet at 63fec000/ethernet-phy at 0 has a unit name, but no reg property Fix this warning by adding reg property from such node. Signed-off-by: Marco Franchi <redacted>
I'm not sure if you tested the change, but I'm seeing the following warning. Warning (reg_format): "reg" property in /soc/aips at 60000000/ethernet at 63fec000/ethernet-phy at 0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Shawn
quoted hunk
--- Changes since v2: -change message log -add reg property arch/arm/boot/dts/imx53-tx53.dtsi | 1 + 1 file changed, 1 insertion(+)diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 76e7186..61ecd13 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi@@ -226,6 +226,7 @@ status = "okay"; phy0: ethernet-phy at 0 { + reg = <0>; interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; };-- 2.7.4