[PATCH 4/4] ARM: dts: iwg22d-sodimm: sort dt nodes
From: Fabrizio Castro <hidden>
Date: 2017-10-13 13:03:16
Also in:
linux-devicetree, linux-renesas-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
Improve the layout of r8a7745-iwg22d-sodimm.dts by sorting the nodes alphabetically. Signed-off-by: Fabrizio Castro <redacted> Signed-off-by: Chris Paterson <redacted> --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 62 ++++++++++++++--------------- 1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 5d5bb2f..5003a8f 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts@@ -16,9 +16,9 @@ compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; aliases { + ethernet0 = &avb; serial3 = &scif4; serial5 = &hscif1; - ethernet0 = &avb; }; chosen {
@@ -40,6 +40,25 @@ }; }; +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy at 3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; + }; +}; + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default";
@@ -48,7 +67,18 @@ status = "okay"; }; +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + &pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data", "hscif1_ctrl"; function = "hscif1";
@@ -59,11 +89,6 @@ function = "scif4"; }; - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0";
@@ -83,25 +108,6 @@ status = "okay"; }; -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy at 3 { - /* - * On some older versions of the platform (before R4.0) the phy address - * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. - */ - reg = <3>; - micrel,led-mode = <1>; - }; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default";
@@ -112,12 +118,6 @@ status = "okay"; }; -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - &usbphy { status = "okay"; };
--
2.7.4