[PATCH v2 15/16] arm64: dts: marvell: armada-3720-db: enable second UART port
From: Miquel Raynal <hidden>
Date: 2017-10-13 09:01:59
Also in:
linux-devicetree, linux-gpio, linux-serial
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-10-30 · Re: [PATCH v2 15/16] arm64: dts: marvell: armada-3720-db: enable second UART port · Gregory CLEMENT <hidden>
Enable Armada-3720-DB second UART port by adding the corresponding device tree node in the board DTS and enabling it. Signed-off-by: Miquel Raynal <redacted> Acked-by: Gregory CLEMENT <redacted> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 9df0f06ce607..15713c19b3d0 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts@@ -216,7 +216,7 @@ /* * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through - * an FTDI + * an FTDI (also on CON24(V2.0)/CON26(V1.4)). */ &uart0 { pinctrl-names = "default";
@@ -224,6 +224,13 @@ status = "okay"; }; +/* CON26(V2.0)/CON28(V1.4) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + /* CON27(V2.0)/CON29(V1.4) */ &usb2 { status = "okay";
--
2.11.0