[PATCH v2 09/16] serial: mvebu-uart: add TX interrupt trigger for pulse interrupts
From: Miquel Raynal <hidden>
Date: 2017-10-13 09:01:53
Also in:
linux-devicetree, linux-gpio, linux-serial
Subsystem:
marvell armada 3700 serial driver, the rest, tty layer and serial drivers · Maintainers:
Pali Rohár, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
From: Allen Yan <redacted> Pulse interrupts (extended UART only) needs a change of state to trigger the TX interrupt. In addition to enabling the TX_READY_INT_EN flag, produce a FIFO state change from 'empty' to 'not full'. For this, write only one data byte in TX start, making the TX FIFO not empty, and wait for the TX interrupt to continue the transfer. Signed-off-by: Allen Yan <redacted> Signed-off-by: Miquel Raynal <redacted> Reviewed-by: Gregory CLEMENT <redacted> --- drivers/tty/serial/mvebu-uart.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 6bd0c40008bb..e52248ec2689 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c@@ -165,8 +165,16 @@ static void mvebu_uart_stop_tx(struct uart_port *port) static void mvebu_uart_start_tx(struct uart_port *port) { - unsigned int ctl = readl(port->membase + UART_INTR(port)); + unsigned int ctl; + struct circ_buf *xmit = &port->state->xmit; + if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { + writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + ctl = readl(port->membase + UART_INTR(port)); ctl |= CTRL_TX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); }
--
2.11.0