[PATCH v2 8/8] arm64: dts: renesas: eagle: add EtherAVB support

On Tue, Oct 10, 2017 at 09:48:42AM +0200, Simon Horman wrote:

On Tue, Oct 10, 2017 at 09:33:46AM +0200, Simon Horman wrote:

quoted

On Mon, Oct 09, 2017 at 08:57:42PM +0300, Sergei Shtylyov wrote:

quoted

On 10/05/2017 12:05 PM, Simon Horman wrote:

quoted

quoted

quoted

On 9/21/2017 4:08 PM, Geert Uytterhoeven wrote:

quoted

quoted

Define the Eagle board  dependent part of the EtherAVB device node.
Enable DHCP  and NFS root for the kernel booting.

Based  on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <redacted>
Signed-off-by: Sergei Shtylyov <redacted>

quoted

--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts

[...]

quoted

quoted

@@ -43,3 +44,14 @@
  &scif0 {
         status = "okay";
  };
+
+&avb {
+       renesas,no-ether-link;
+       phy-handle = <&phy0>;
+       status = "okay";
+
+       phy0: ethernet-phy at 0 {
+               rxc-skew-ps = <1500>;
+               reg = <0>;

Any specific reason why you don't want to wire up the interrupt?

                 interrupt-parent = <&gpio2>;

   I thought it's quite obvious -- we don't have GPIOs yet, and GPIOs seem
to require PFC.

Of course. And these can be added later.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied.

   Unfortunately, you applied an outdated version of this patch. :-(

Sorry, I think patchwork has been playing up of late - or my use of it!

Could you repost the correct patch so I am sure to get the right one
the second time around?

Please ignore that request. I'll go ahead and apply v2.

Done, please check renesas-next-20171010-v4.14-rc1