* H. Nikolaus Schaller [off-list ref] [171019 09:57]:

Hi Tony,

quoted

Am 19.10.2017 um 18:24 schrieb Tony Lindgren [off-list ref]:

* H. Nikolaus Schaller [off-list ref] [171018 08:49]:

quoted

quoted

Am 18.10.2017 um 15:22 schrieb Tony Lindgren [off-list ref]:

* H. Nikolaus Schaller [off-list ref] [171018 05:49]:

quoted

quoted

Am 18.10.2017 um 14:28 schrieb Pavel Machek [off-list ref]:

So I started something, it is at.

https://github.com/pavelmachek/libbattery

My battery on n900 is currently uncalibrated (and charging), still it
gets some kind of estimation:

Battery -1 %
Seconds -1
State 1
Voltage 3.88 V
Battery 63 %

Of course, there's a lot more work to be done.

Nice start but not a solution to our problem.

Our problem is that people simply expect that for example https://packages.debian.org/wheezy/xfce/xfce4-battery-plugin
displays the battery percentage.

I think we could make things compatible with various battery apps by
having libbattery write back the capacity percentage and time remaining
to the kernel driver via sysfs or a dev entry. Then the kernel interface
can just display the data to whatever apps.

Hm. That would be quite difficult to understand and maintain code.

How so? The libbattery can do it all, then the kernel drivers needing
that will just display the most recent values to maintain compability
with battery apps.

Well, it looks as if you are thinking about a much more complex solution
than I am...

The proposal we are discussing as

[RFC PATCH 5/5] power: generic-adc-battery: Add capacity handling

just reads the current voltage, charging current and uses a (nonlinear)
mapping to 0% .. 100%.

Right, I was discussing Pavel's libbattery link posted above. No
comments on the current patch series. Let's move the libbattery stuff
to a new thread to avoid confusion.

Regards,

Tony