[PATCH v7 02/10] arm: dts: sunxi: Restore EMAC changes
flat view
From: andrew@lunn.ch (Andrew Lunn)
Date: 2017-10-18 16:45:14
Also in:
linux-devicetree, lkml, netdev
On Wed, Oct 18, 2017 at 01:44:50PM +0200, Corentin Labbe wrote:
quoted hunk ↗ jump to hunk
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore arm DT about dwmac-sun8i This reverts commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 9 ++++++++ arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 19 +++++++++++++++++ arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 19 +++++++++++++++++ arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 ++++++ arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 +++++++ arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 +++++++ arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++ arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 +++++++ arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 22 +++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 16 ++++++++++++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 26 +++++++++++++++++++++++ 11 files changed, 147 insertions(+)diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index b1502df7b509..6713d0f2b3f4 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts@@ -56,6 +56,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; };@@ -102,6 +104,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>;diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index e1dba9ffa94b..f2292deaa590 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts@@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; };@@ -111,6 +112,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; +
quoted hunk ↗ jump to hunk
+&external_mdio { + ext_rgmii_phy: ethernet-phy at 1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; +
Hi Corentin
I'm wondering about the order of the patches. Does the external_mdio
node actually exist at this point? Or only later when other patches
are applied?
Andrew