[PATCH v2 3/3] arm: dts: add Hi3521A dts
From: Marty E. Plummer <hidden>
Date: 2017-10-17 22:42:07
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
arm and arm64 soc sub-architectures (common parts), the rest · Maintainers:
Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Linus Torvalds
Add hi3521a.dtsi and hi3521a-rs-dm290e.dts for RaySharp CCTV systems, marketed under the name Samsung SDR-B74301N Signed-off-by: Marty E. Plummer <redacted> --- Chages in v2: - Use SPDX tag and GPL-2.0+ - Add memory addresses to some nodes - Add arm arch timer - Add more specific compatible strings to a few nodes. arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/hi3521a-rs-dm290e.dts | 41 +++++ arch/arm/boot/dts/hi3521a.dtsi | 308 ++++++++++++++++++++++++++++++++ 3 files changed, 351 insertions(+) create mode 100644 arch/arm/boot/dts/hi3521a-rs-dm290e.dts create mode 100644 arch/arm/boot/dts/hi3521a.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faf46abaa4a2..e7b9b5dde20f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile@@ -189,6 +189,8 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb +dtb-$(CONFIG_ARCH_HI3521A) += \ + hi3521a-rs-dm290e.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += \
diff --git a/arch/arm/boot/dts/hi3521a-rs-dm290e.dts b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts
new file mode 100644
index 000000000000..3634fe96399e
--- /dev/null
+++ b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts@@ -0,0 +1,41 @@ +/* + * Copyright (C) 2017 Marty Plummer <hanetzer@startmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "hi3521a.dtsi" + +/ { + model = "RaySharp RS-DM-290E DVR Board"; + compatible = "raysharp,rs-dm-290e", "hisilicon,hi3521a"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory at 800000000 { + device_type = "memory"; + reg = <0x80000000 0xf00000>; + }; +}; + +&hi_sfc { + status = "okay"; + spi-nor at 0 { + compatible = "mxicy,mx25l25635e","jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&dual_timer0 { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/hi3521a.dtsi b/arch/arm/boot/dts/hi3521a.dtsi
new file mode 100644
index 000000000000..49111272fd76
--- /dev/null
+++ b/arch/arm/boot/dts/hi3521a.dtsi@@ -0,0 +1,308 @@ +/* + * Copyright (C) 2017 Marty Plummer <hanetzer@startmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dt-bindings/clock/hi3521a-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + clk_3m: clk_3m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + hi_sfc: spi-nor-controller at 10000000 { + compatible = "hisilicon,hi3521a-spi-nor", "hisilicon,fmc-spi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000000 0x10000>, <0x14000000 0x1000000>; + reg-names = "control", "memory"; + clocks = <&crg HI3521A_FMC_CLK>; + status = "disabled"; + }; + + gic: interrupt-controller at 10301000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10301000 0x1000>, <0x10302000 0x1000>; + }; + + dmac: dma-controller at 10060000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10060000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + dual_timer0: timer at 12000000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12000000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer1: timer at 12010000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12010000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + dual_timer2: timer at 12020000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12020000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + dual_timer3: timer at 12030000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12030000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + crg: clock-reset-controller at 12040000 { + compatible = "hisilicon,hi3521a-crg"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x12040000 0x10000>; + }; + + wdt0: watchdog at 12070000 { + compatible = "arm,sp805", "arm,primecell"; + arm,primecell-periphid = <0x00141805>; + reg = <0x12070000 0x1000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + }; + + uart0: serial at 12080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12080000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3521A_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: serial at 12090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12090000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3521A_UART1_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: serial at 120a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x120a0000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3521A_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio0: gpio at 12150000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12150000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio at 12160000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12160000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio at 12170000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12170000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio3: gpio at 12180000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12180000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio4: gpio at 12190000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12190000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio5: gpio at 121a0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121a0000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio6: gpio at 121b0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121b0000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio7: gpio at 121c0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121c0000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio8: gpio at 121d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121d0000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio9: gpio at 121e0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121e0000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio10: gpio at 121f0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121f0000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio11: gpio at 12200000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12200000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio12: gpio at 12210000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12210000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio13: gpio at 12220000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12220000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; +};
--
2.14.2