Thread (6 messages) 6 messages, 2 authors, 2017-09-21

[PATCH v2 0/4] arm64: marvell: 7k/8k: improve network support

flat view
STALE3306d

From: Antoine Tenart <hidden>
Date: 2017-09-21 07:54:06

Revision v2 of 2 in this series.

Revisions (2)
  1. v1 [diff vs current]
  2. v2 current
Hi all,

This series improves the network support on Marvell 7k and 8k platforms
by adding descriptions of the comphy, and by using the comphy in already
available networking ports. The series also introduces a description of
the SFP ports on the Marvell Armada 7040-db and 8040-db.

Two defconfig patches also improve the Marvell ARM64 support by enabling
required options allowing to use the networking ports properly.

This series follows recent improvements in the PPv2 driver.

Based on v4.14-rc1, and tested on the Marvell Armada 7040-db, 8040-db
and 8040-mcbin.

Thanks!
Antoine

Since v1:
  - Added comments in nodes using both a network PHY and a generic PHY.
  - 4 patches were applied on mvebu trees.

Antoine Tenart (4):
  arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
  arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
  arm64: dts: marvell: 7040-db: enable the SFP port
  arm64: dts: marvell: 8040-db: enable the SFP ports

 arch/arm64/boot/dts/marvell/armada-7040-db.dts    | 11 +++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts    | 10 ++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts |  9 +++++++++
 3 files changed, 30 insertions(+)

-- 
2.13.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help