[PATCH] arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
From: Gregory CLEMENT <hidden>
Date: 2017-09-19 14:09:22
Hi, On mar., ao?t 29 2017, Gregory CLEMENT [off-list ref] wrote:
By adding this regulator, a proper reset is done during boot. Without this, the UHS failed to be detected after a warm reboot when the SD card remained in the slot, then it fallback to an HS. Note that the vmcc is supported by the xenon driver only with the following fix: "mmc: sdhci-xenon: add set_power callback". Signed-off-by: Gregory CLEMENT <redacted>
Applied on mvebu/dt64 Gregory
quoted hunk
--- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 9df0f06ce607..e6e0f38ce6e1 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts@@ -94,6 +94,16 @@ 3300000 0x0>; enable-active-high; }; + + vcc_sd_reg2: regulator-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; }; /* Gigabit module on CON19(V2.0)/CON21(V1.4) */@@ -179,6 +189,7 @@ bus-width = <4>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; + vmmc-supply = <&vcc_sd_reg2>; status = "okay"; };-- 2.14.1
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com