Thread (1 message) 1 message, 1 author, 2017-09-15
DORMANTno replies

[PATCH v2 1/8] dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis

From: heiko@sntech.de (Heiko Stuebner)
Date: 2017-09-15 09:18:05
Also in: linux-devicetree, linux-rockchip
Subsystem: drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Possibly related (same subject, not in this thread)

Some (older or lower power) Rockchip socs use Utgard-based Mali-GPUs.
So add the necessary compatibles for them. As the setup is the same for
all of them (needing only the additional reset line), they get added in
a somewhat condensed form, to not inflate the document unnecessary.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index b4ebd56d03f3..24aacafb2594 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -13,6 +13,10 @@ Required properties:
       + allwinner,sun50i-h5-mali
       + amlogic,meson-gxbb-mali
       + amlogic,meson-gxl-mali
+      + rockchip,rk3036-mali
+      + rockchip,rk3066-mali
+      + rockchip,rk3188-mali
+      + rockchip,rk3228-mali
       + stericsson,db8500-mali
 
   - reg: Physical base address and length of the GPU registers
@@ -63,6 +67,10 @@ to specify one more vendor-specific compatible, among:
     Required properties:
       * resets: phandle to the reset line for the GPU
 
+  - Rockchip variants:
+    Required properties:
+      * resets: phandle to the reset line for the GPU
+
   - stericsson,db8500-mali
     Required properties:
       * interrupt-names and interrupts:
-- 
2.14.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help