[PATCH v2 02/10] dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
From: f.fainelli@gmail.com (Florian Fainelli)
Date: 2017-09-28 23:18:06
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add binding documentation for the Broadcom Hurricane 2 SoCs used in switching control planes. Acked-by: Jon Mason <redacted> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
new file mode 100644
index 000000000000..a124c7fc4dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt@@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2";
--
2.14.1