[PATCH v2 10/13] drm/sun4i: hdmi: Add A31 specific DDC register definitions
From: Chen-Yu Tsai <hidden>
Date: 2017-09-26 07:01:13
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chen-Yu Tsai, Linus Torvalds
The DDC block for the HDMI controller is different on the A31. This patch adds the register definitions. Signed-off-by: Chen-Yu Tsai <redacted> --- drivers/gpu/drm/sun4i/sun4i_hdmi.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
index b1124a8f9f05..da4ea9efc6fa 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h@@ -153,6 +153,37 @@ #define SUN4I_HDMI_DDC_FIFO_SIZE 16 +/* A31 specific */ +#define SUN6I_HDMI_DDC_CTRL_REG 0x500 +#define SUN6I_HDMI_DDC_CTRL_RESET BIT(31) +#define SUN6I_HDMI_DDC_CTRL_START_CMD BIT(27) +#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE BIT(6) +#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE BIT(4) +#define SUN6I_HDMI_DDC_CTRL_ENABLE BIT(0) + +#define SUN6I_HDMI_DDC_CMD_REG 0x508 +#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count) ((count) << 16) +/* command types in lower 3 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_ADDR_REG 0x50c +#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg) (((seg) & 0xff) << 24) +#define SUN6I_HDMI_DDC_ADDR_EDDC(addr) (((addr) & 0xff) << 16) +#define SUN6I_HDMI_DDC_ADDR_OFFSET(off) (((off) & 0xff) << 8) +#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr) (((addr) & 0xff) << 1) + +#define SUN6I_HDMI_DDC_INT_STATUS_REG 0x514 +#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT BIT(8) +/* lower 8 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_FIFO_CTRL_REG 0x518 +#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR BIT(15) +/* lower 9 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_CLK_REG 0x520 +/* DDC CLK bit fields are the same, but the formula is not */ + +#define SUN6I_HDMI_DDC_FIFO_DATA_REG 0x580 + enum sun4i_hdmi_pkt_type { SUN4I_HDMI_PKT_AVI = 2, SUN4I_HDMI_PKT_END = 15,
--
2.14.1