Thread (17 messages) 17 messages, 3 authors, 2017-09-28
STALE3184d

[PATCH 2/3] arm64: allwinner: a64: add CPU opp table

From: icenowy@aosc.io (Icenowy Zheng)
Date: 2017-09-23 00:16:13
Also in: linux-clk, linux-devicetree, lkml
Subsystem: arm/allwinner sunxi soc support, the rest · Maintainers: Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds

Add the operating table for the CPU (ARM cores) on Allwinner A64 SoC.

OPPs higher to 816MHz is temporarily dropped, to prevent overheat on
boards with AXP803 support and undervoltage on boards without AXP803
support.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 20aba7b186aa..0532da4939eb 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -52,6 +52,23 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -61,6 +78,10 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu at 1 {
@@ -68,6 +89,7 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu2: cpu at 2 {
@@ -75,6 +97,7 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu3: cpu at 3 {
@@ -82,6 +105,7 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
-- 
2.13.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help