[PATCH v5 3/3] media: ov7670: Add the s_power operation
From: sakari.ailus@iki.fi (Sakari Ailus)
Date: 2017-09-19 07:36:47
Also in:
linux-media, lkml
Hi Wenyou, On Tue, Sep 19, 2017 at 08:45:09AM +0800, Wenyou Yang wrote:
Add the s_power operation which is responsible for manipulating the power dowm mode through the PWDN pin and the reset operation through the RESET pin.
This is still broken: accessing controls through the sub-device node won't work when the device is powered off. The options are what I suggested the previous time: keep it powered at all times, fix it or convert to runtime PM.
quoted hunk ↗ jump to hunk
Signed-off-by: Wenyou Yang <redacted> --- Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: - Add the patch to support the get_fmt ops. - Remove the redundant invoking ov7670_init_gpio(). drivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index 73ceec63a8ca..8e86479d8a24 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c@@ -1544,6 +1544,22 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis } #endif +static int ov7670_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov7670_info *info = to_state(sd); + + if (info->pwdn_gpio) + gpiod_direction_output(info->pwdn_gpio, !on); + if (on && info->resetb_gpio) { + gpiod_set_value(info->resetb_gpio, 1); + usleep_range(500, 1000); + gpiod_set_value(info->resetb_gpio, 0); + usleep_range(3000, 5000); + } + + return 0; +} + static void ov7670_get_default_format(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *format) {@@ -1577,6 +1593,7 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = { .g_register = ov7670_g_register, .s_register = ov7670_s_register, #endif + .s_power = ov7670_s_power, }; static const struct v4l2_subdev_video_ops ov7670_video_ops = {@@ -1694,23 +1711,25 @@ static int ov7670_probe(struct i2c_client *client, if (ret) return ret; - ret = ov7670_init_gpio(client, info); - if (ret) - goto clk_disable; - info->clock_speed = clk_get_rate(info->clk) / 1000000; if (info->clock_speed < 10 || info->clock_speed > 48) { ret = -EINVAL; goto clk_disable; } + ret = ov7670_init_gpio(client, info); + if (ret) + goto clk_disable; + + ov7670_s_power(sd, 1); + /* Make sure it's an ov7670 */ ret = ov7670_detect(sd); if (ret) { v4l_dbg(1, debug, client, "chip found @ 0x%x (%s) is not an ov7670 chip.\n", client->addr << 1, client->adapter->name); - goto clk_disable; + goto power_off; } v4l_info(client, "chip found @ 0x%02x (%s)\n", client->addr << 1, client->adapter->name);@@ -1789,6 +1808,8 @@ static int ov7670_probe(struct i2c_client *client, #endif hdl_free: v4l2_ctrl_handler_free(&info->hdl); +power_off: + ov7670_s_power(sd, 0); clk_disable: clk_disable_unprepare(info->clk); return ret;@@ -1806,6 +1827,7 @@ static int ov7670_remove(struct i2c_client *client) #if defined(CONFIG_MEDIA_CONTROLLER) media_entity_cleanup(&info->sd.entity); #endif + ov7670_s_power(sd, 0); return 0; }-- 2.13.0
-- Regards, Sakari Ailus e-mail: sakari.ailus at iki.fi