[PATCH v1 02/10] clk: at91: pmc: Save SCSR during suspend
From: nicolas.ferre@microchip.com (Nicolas Ferre)
Date: 2017-09-13 12:09:50
Also in:
linux-clk, linux-iio, linux-pwm, linux-serial, lkml
On 08/09/2017 at 17:35, Romain Izard wrote:
The contents of the System Clock Status Register (SCSR) needs to be restored into the System Clock Enable Register (SCER). As the bootloader will restore some clocks by itself, the issue can be missed as only the USB controller, the LCD controller, the Image Sensor controller and the programmable clocks will be impacted. Fix the obvious typo in the suspend/resume code, as the IMR register does not need to be saved twice. Signed-off-by: Romain Izard <redacted>
Yes, it looks like a typo: Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> I didn't experienced the issue with LCD nor USB though. Regards,
quoted hunk ↗ jump to hunk
--- drivers/clk/at91/pmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index 5c2b26de303e..07dc2861ad3f 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c@@ -86,7 +86,7 @@ static int pmc_suspend(void) { int i; - regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.scsr); + regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr); regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0); regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr); regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor);@@ -129,7 +129,7 @@ static void pmc_resume(void) if (pmc_cache.pllar != tmp) pr_warn("PLLAR was not configured properly by the firmware\n"); - regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.scsr); + regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr); regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0); regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr); regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor);
-- Nicolas Ferre