[PATCH net-next v2 09/10] arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
flat view
STALE3342d
REVIEWED: 1 (0M)
From: Antoine Tenart <hidden>
Date: 2017-08-22 17:08:29
Also in:
netdev
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
1 review trailer.
The network driver on Marvell SoC (7k/8k) needs to access some registers in the system controller to configure its ports at runtime. This patch adds a phandle reference to the syscon system controller node in the ppv2 node. Signed-off-by: Antoine Tenart <redacted> Tested-by: Marcin Wojtas <redacted> --- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 1 + arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 4c68605675a8..18299e164cb7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi@@ -65,6 +65,7 @@ reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; + marvell,system-controller = <&cpm_syscon0>; status = "disabled"; dma-coherent;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 923f354b02f0..5ae8fa575859 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi@@ -72,6 +72,7 @@ reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; + marvell,system-controller = <&cps_syscon0>; status = "disabled"; dma-coherent;
--
2.13.5