On Mon, Jul 31, 2017 at 5:03 PM, Simon Horman
[off-list ref] wrote:

----------------------------------------------------------------
Renesas ARM64 Based SoC DT Updates for v4.14

* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC

* Add R-Car D3 (r8a77995) SoC and Draak board support

  Adds minimal support for the R-Car D3 SoC and the Draak development
  board, allowing to boot from a ramdisk using a serial console.

* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board

  The VC6 is an I2C-controlled programmable clock generator, used on the
  board to provide a display dot clock. Add it to DT.

* Add missing second pair of DMA names to MSIOF nodes to
  R-Car M3-W (r8a7796) SoC

  MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
  DMA specifiers.  However, the second pair of corresponding DMA names was
  missing.

* Add support for the DU to R-Car H3 (r8a7795) SoC

  Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
  ES2.0 are compatible save for the links to the VSPs that are described
  explicitly in DT, so there's no need for a new ES2-specific compatible
  string.

* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards

* Enable DU on R-Car M3-W (r8a7796) Salvator-X board

* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards

* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs

  Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
  slave device."

* Move CPG_AUDIO_CLK_I from board to soc files

  Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
  SoC-specific, not board-specific."

* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs

  Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
  the distortion correction engine is a drawing processor with a simple
  instruction system capable of referencing data on an external memory as
  2D texture data and performing texture mapping and drawing with respect
  to any shape that is split into triangular objects."

Pulled into next/dt64, thanks!

       Arnd