Thread (1 message) 1 message, 1 author, 2017-08-03
DORMANTno replies

[PATCH] arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files

From: Gregory CLEMENT <hidden>
Date: 2017-08-03 12:23:32

Hi,
 
 On mar., juil. 18 2017, Gregory CLEMENT [off-list ref] wrote:
Since the introduction of the CP110 dt files, the sata node was
misplaced. Move it at the right place. Thanks to this, the files are
completely ordered.

Signed-off-by: Gregory CLEMENT <redacted>
Applied on mvebu/dt64

Gregory
quoted hunk
---
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 18 +++++++++---------
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 18 +++++++++---------
 2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 394e54d37fff..1acd6a92d1a7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -162,15 +162,6 @@
 				};
 			};
 
-			cpm_sata0: sata at 540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 15>;
-				status = "disabled";
-			};
-
 			cpm_usb3_0: usb3 at 500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -191,6 +182,15 @@
 				status = "disabled";
 			};
 
+			cpm_sata0: sata at 540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 15>;
+				status = "disabled";
+			};
+
 			cpm_xor0: xor at 6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2e6422a66d76..a21814855799 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -163,15 +163,6 @@
 
 			};
 
-			cps_sata0: sata at 540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 15>;
-				status = "disabled";
-			};
-
 			cps_usb3_0: usb3 at 500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -192,6 +183,15 @@
 				status = "disabled";
 			};
 
+			cps_sata0: sata at 540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 15>;
+				status = "disabled";
+			};
+
 			cps_xor0: xor at 6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,
-- 
2.13.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help