[PATCH 0/4] GR-Peach DTS update

On Thu, Aug 24, 2017 at 06:53:50AM -0400, Simon Horman wrote:

On Thu, Aug 24, 2017 at 10:48:39AM +0200, Jacopo Mondi wrote:

quoted

Hello Simon,
   now that RZ/A1 pin controller is merged, it's time to enable some peripheral
devices on GR-Peach has it has been done for Genmai and RSK boards.

The series is based on Simon's "renesas-dt2-for-v4.14" tag release, so it should
be ideally applied after v4.14-rc1 is out, as it needs pin controller nodes to
be defined in r7s72100.dtsi.

Patch 2/4 enables EHTER interface, even if I've not been able to exchange any
traffic on that. I can set the ip address and probe the device and double
checked the pin configuration process against u-boot sources (where the
interface is working instead). Sending the patch anyway and let you decide what
to do with that.

Thanks
   j

Jacopo Mondi (4):
  arm: dts: gr-peach: Remove empty line
  arm: dts: gr-peach: Add SCIF2 pin group
  arm: dts: gr-peach: Add ETHER pin group
  arm: dts: gr-peach: Add user led device nodes

Thanks I have applied the 1st, 2nd and 4th (non-ETHER) patches above for v4.15.
I am leaving the 3rd (ETHER) patch pending resolution of the review
provided by Geert.

BTW, the prefix these patches should start with "ARM:".
I fixed this when applying the patches described above.