[PATCH] arm64: dts: rockchip: add rk3328-rock64 board

Hi Shawn,

Am Donnerstag, 10. August 2017, 09:24:18 CEST schrieb Shawn Lin:

On 2017/8/10 6:04, Heiko Stuebner wrote:

quoted

The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD
Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral
devices interface for makers to integrate with sensors and devices.

The devicetree currently supports basic peripherals, with more to be
added later on.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

[...]

quoted

+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+

supports-{emmc, sd, sdio} aren't vaild properties.
If you do want to speedup the init process and you
could add no-sd and no-sdio for emmc.

num-slots is deprecated and would be cleaned from all dts for 4.14
cycle. And disable-wp is only used for SD card now.

The same comment for the following sd and sdio nodes.

Thanks for keeping an eye on the mmc properties. I've dropped
the offending ones and send a v2 patch.


Heiko