[PATCH v3 7/9] ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
From: jbrunet@baylibre.com (Jerome Brunet)
Date: 2017-08-31 13:54:10
Also in:
linux-amlogic, linux-devicetree, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
Enable sdcard UHS modes, up to SDR50, on p20x based boards. While the s905 supports SDR104 mode, it appears that the PCB of p20x based boards can't cope with a rate as high as 200Mhz. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 704b214e8894..23c08c3afd0a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi@@ -226,6 +226,9 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp;
--
2.9.5