Thread (4 messages) 4 messages, 1 author, 2017-08-31
STALE3211d REVIEWED: 8 (7M)
Revisions (6)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 current
  6. v6 [diff vs current]

[PATCH v5 2/3] dt-bindings: PCI iproc: Implement optional property prsnt-gpios

From: Oza Pawandeep <hidden>
Date: 2017-08-31 04:44:46
Also in: linux-devicetree, linux-pci, lkml
Subsystem: open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds

Add description for optional device tree property
'prsnt-gpios' for PCI hotplug feature.

Signed-off-by: Oza Pawandeep <redacted>
Reviewed-by: Ray Jui <redacted>
Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..0c5f631 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -72,6 +72,20 @@ Optional properties:
 - brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
 require the interrupt enable registers to be set explicitly to enable MSI
 
+Optional properties:
+- slot-pluggable: PCI hotplug feature is supported.
+- prsnt-gpios: Array of gpios, needs to be present if Hotplug is supported.
+
+Refer to the following binding documents for more detailed description on
+the use of 'slot-pluggable' and 'prsnt-gpios'.
+  Documentation/devicetree/bindings/pci/pci.txt
+
+Example:
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>;
+This is x4 connector: monitoring max 2 present lines.
+prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>, <&pca9505 34 1>;
+This is x8 connector: monitoring max 3 present lines.
+
 Example:
 	pcie0: pcie at 18012000 {
 		compatible = "brcm,iproc-pcie";
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help