[PATCH v2 03/16] mmc: meson-gx: clean up some constants
From: jbrunet@baylibre.com (Jerome Brunet)
Date: 2017-08-21 16:10:35
Also in:
linux-amlogic, linux-mmc, lkml
Subsystem:
arm/amlogic meson soc support, multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Ulf Hansson, Linus Torvalds
Remove unused clock rate defines. These should not be defined but requested from the clock framework. Also correct typo on the DELAY register Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/mmc/host/meson-gx-mmc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index d480a8052a06..8a74a048db88 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c@@ -45,9 +45,7 @@ #define CLK_DIV_MAX 63 #define CLK_SRC_MASK GENMASK(7, 6) #define CLK_SRC_XTAL 0 /* external crystal */ -#define CLK_SRC_XTAL_RATE 24000000 #define CLK_SRC_PLL 1 /* FCLK_DIV2 */ -#define CLK_SRC_PLL_RATE 1000000000 #define CLK_CORE_PHASE_MASK GENMASK(9, 8) #define CLK_TX_PHASE_MASK GENMASK(11, 10) #define CLK_RX_PHASE_MASK GENMASK(13, 12)
@@ -57,7 +55,7 @@ #define CLK_PHASE_270 3 #define CLK_ALWAYS_ON BIT(24) -#define SD_EMMC_DElAY 0x4 +#define SD_EMMC_DELAY 0x4 #define SD_EMMC_ADJUST 0x8 #define SD_EMMC_CALOUT 0x10 #define SD_EMMC_START 0x40
--
2.9.5