[PATCH v2 4/9] ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
From: jbrunet@baylibre.com (Jerome Brunet)
Date: 2017-08-21 16:08:17
Also in:
linux-amlogic, linux-devicetree, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
Changing the card voltage on the nanopi-k2 is not instantaneous,
especially when switching from 3.3v to 1.8v.
It take at least 3ms for the regulator to go from 3.3v to 1.8v. Add
margin to that to make sure we don't upset the sdcard during the voltage
switch
Fixes: 9bc7ffb08daf ("arm64: dts: amlogic: Add NanoPi K2")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index e4c6b2fd52ee..de4ed28d78bc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts@@ -107,6 +107,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <100>; + regulator-settling-time-down-us = <5000>; }; wifi_32k: wifi-32k {
--
2.9.5