[PATCH 1/3] Documentation: dt: iio: at91-sama5d2_adc: add optional dma property
From: robh@kernel.org (Rob Herring)
Date: 2017-08-17 15:11:05
Also in:
linux-devicetree, linux-iio, lkml
On Thu, Aug 10, 2017 at 03:34:57PM +0300, Eugen Hristev wrote:
Added property for DMA configuration of the device.
"dt-bindings: iio: ..." is preferred for subject.
quoted hunk ↗ jump to hunk
Signed-off-by: Eugen Hristev <redacted> --- Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 7 +++++++ 1 file changed, 7 insertions(+)diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 552e7a8..5f94d47 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt@@ -17,6 +17,11 @@ Required properties: This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH +Optional properties: + - dmas: Phandle to dma channel for the ADC. + See ../../dma/dma.txt for details. + - dma-names: Must be "rx" when dmas property is being used.
*-names is pointless when there's only one.
quoted hunk ↗ jump to hunk
+ Example: adc: adc at fc030000 {@@ -31,4 +36,6 @@ adc: adc at fc030000 { vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; + dma-names = "rx"; }-- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel