[PATCH v2 3/4] dt-bindings: mt8173-mtu3: add generic compatible and rename file
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
Date: 2017-08-16 06:08:40
Also in:
linux-devicetree, linux-mediatek, lkml
Subsystem:
mediatek usb3 drd ip driver, open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Chunfeng Yun, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
The mt8173-mtu3.txt actually holds the bindings for all mediatek
SoCs with usb3 DRD IP, so add a generic compatible and change the
name to mediatek,mtu3.txt.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../usb/{mt8173-mtu3.txt => mediatek,mtu3.txt} | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
rename Documentation/devicetree/bindings/usb/{mt8173-mtu3.txt => mediatek,mtu3.txt} (92%)
diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
similarity index 92%
rename from Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
rename to Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 1d7c3bc..545251e 100644
--- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt@@ -1,7 +1,11 @@ The device node for Mediatek USB3.0 DRD controller Required properties: - - compatible : should be "mediatek,mt8173-mtu3" + - compatible : should be "mediatek,soc-model-mtu3", "mediatek,mtu3", + soc-model is the name of SoC, such as mt8173, mt2712 etc, + when using "mediatek,mtu3" compatible string, you need SoC specific + ones in addition, one of: + - "mediatek,mt8173-mtu3" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for device IP and "ippc" for IP port control - interrupts : interrupt used by the device IP
--
1.7.9.5