[PATCH] arm64: bcm2837 dts: enable bcm2708 frambuffer driver for the raspberry pi-3

VOTARY GITHUB [off-list ref] writes:

From 3200cb6fd787390df1bccf1bb1f7a67ca04136fd Mon Sep 17 00:00:00 2001
From: VT-Github-Raspberrypi <redacted>
Date: Tue, 8 Aug 2017 16:57:15 +0530
Subject: [PATCH] arm64: bcm2837 dts: enable bcm2708 frambuffer driver for the
?raspberry pi-3

This fb drivers to make rendering full boot up logs on the screen.

Fixed: https://github.com/raspberrypi/linux/issues/2156

I don't think we should be adding DT nodes for the old, downstream-only
fbdev driver to the upstream tree.  We have nodes already for the open
source driver that directly programs the hardware, which will disable
the firmware's closed-source modesetting interfaces used by bcm2708
fbdev.  For early boot display, the proper solution is simplefb, not a
custom fbdev driver.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170814/70c00878/attachment.sig>