[PATCH 1/7] mtd: spi-nor: cadence-quadspi: add a delay in write sequence
From: robh@kernel.org (Rob Herring)
Date: 2017-08-10 00:08:35
Also in:
linux-devicetree, lkml
On Tue, Aug 01, 2017 at 10:24:28AM +0530, Vignesh R wrote:
quoted hunk ↗ jump to hunk
As per 66AK2G02 TRM[1] SPRUHY8F section 11.15.5.3 Indirect Access Controller programming sequence, a delay equal to couple QSPI master clock(~5ns) is required after setting CQSPI_REG_INDIRECTWR_START bit and writing data to the flash. Add a new compatible to handle the couple of cycles of delay required in the indirect write sequence, since this delay is specific to TI 66AK2G SoC. [1]http://www.ti.com/lit/ug/spruhy8f/spruhy8f.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> --- Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 1 + drivers/mtd/spi-nor/cadence-quadspi.c | 13 +++++++++++++ 2 files changed, 14 insertions(+)diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index f248056da24c..fdd511a83511 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt@@ -2,6 +2,7 @@ Required properties: - compatible : Should be "cdns,qspi-nor". + Should be "ti,k2g-qspi" for TI 66AK2G platform.
Also, this doesn't indicate that "cdns,qspi-nor" is a fallback as you have in the dts files. Reformat to 1 valid combination per line.
- reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the