[PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586 display panels
From: david@lechnology.com (David Lechner)
Date: 2017-08-07 17:41:00
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This adds a new binding for Sitronix ST7586 display panels. Using lego as the vendor prefix in the compatible string because the display panel I am working with is an integral part of the LEGO MINDSTORMS EV3. Signed-off-by: David Lechner <david@lechnology.com> --- v4 changes: * Dropped optional properties and only use pins actually used on LEGO EV3. * Rename dc to a0 since that is what is on the datasheet/LEGO schematic. .../bindings/display/sitronix,st7586.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7586.txt
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
new file mode 100644
index 0000000..1d0dad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt@@ -0,0 +1,22 @@ +Sitronix ST7586 display panel + +Required properties: +- compatible: "lego,ev3-lcd". +- a0-gpios: The A0 signal (since this binding is for serial mode, this is + the pin labeled D1 on the controller, not the pin labeled A0) +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display at 0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + };
--
2.7.4