[PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display
From: Noralf Trønnes <hidden>
Date: 2017-08-03 20:12:06
Also in:
dri-devel, linux-devicetree, linux-fbdev, lkml
Den 03.08.2017 19.11, skrev Andy Shevchenko:
On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko [off-list ref] wrote:quoted
On Thu, Aug 3, 2017 at 6:18 PM, David Lechner [off-list ref] wrote:quoted
The particular display I have is this one: http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/ It looks like it uses a command/data scheme like the MIPI displays, but doesn't use any of the standard values for the commands. The controller can do parallel, SPI and I2C, but the display I have is wired for I2C.It looks very similar to ssd1306. Some description refers to ssd1308.http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf
That pdf refers to another one: http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/ There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and ssd1309: https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c Maybe the ssd1308 will work with that driver... Noralf.