[PATCH v2 4/6] dt-bindings: usb: Add documentation for NS2 IDM USB3
From: robh@kernel.org (Rob Herring)
Date: 2017-08-03 19:08:47
Also in:
linux-devicetree, lkml
On Wed, Jul 26, 2017 at 06:56:25PM -0400, Jon Mason wrote:
quoted hunk ↗ jump to hunk
Add documentation for IDM USB3 registers available in NS2 SoC Signed-off-by: Jon Mason <redacted> --- Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb3-idm.txtdiff --git a/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt b/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt new file mode 100644 index 000000000000..3618dbcbe890 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt@@ -0,0 +1,14 @@ +Broadcom IDM USB3 registers + +Required properties: +- compatible: "brcm,usb3-idm" +- reg: Base address and length of the USB registers + + +Example: + +usb3_idm: idm at 67000000 {
I'm assuming these are all some misc registers in addition to the USB controller? If this is the USB controller itself, then use generic node names for the DT spec. Acked-by: Rob Herring <robh@kernel.org>
+ compatible = "brcm,usb3-idm"; + reg = <0x67000000 0x2000>; +}; + -- 2.7.4