On Mon 24 Jul 23:09 PDT 2017, Vivek Gautam wrote:

Hi Bjorn,


On Tue, Jul 25, 2017 at 11:17 AM, Bjorn Andersson
[off-list ref] wrote:

quoted

From: Vivek Gautam <redacted>

Signed-off-by: Vivek Gautam <redacted>
Signed-off-by: Bjorn Andersson <redacted>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 395666dcce1b..d0865d2f731e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -496,6 +496,17 @@
                        status = "disabled";
                };

+               qfprom: qfprom at 74000 {
+                       compatible = "qcom,qfprom";
+                       reg = <0x00074000 0x8ff>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       qusb2p_hstx_trim: hstx_trim at 24e {
+                               reg = <0x24e 0x2>;
+                               bits = <5 4>;
+                       };

There's one more part to it which will be used by the secondary
USB2 controller.
I was hoping to add this patch along with the USB device tree patches.
Let me know if you are not using this patch for anything now, i can
submit it along with the usb series.

I omitted this due to the rpmcc dependency. But I must have looked at
the wrong node, as there is no such dependency.

So this should be replaced by the full 0387312d9f35 ("arm64: dts:
msm8996: Add device node for qcom qusb2 phy"), which has a commit
message as well.


Thanks for spotting my mistake.

Regards,
Bjorn