Thread (44 messages) read the whole thread 44 messages, 9 authors, 2017-08-17
STALE3270d

[PATCH 10/10] ARM: dts: sun8i: Add SY8106A regulator to Orange Pi PC

From: icenowy@aosc.io (Icenowy Zheng)
Date: 2017-07-23 10:29:47
Also in: linux-clk, linux-devicetree, linux-pm, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

From: Ondrej Jirman <redacted>

Add SY8106A regulator to r_i2c bus and enable the r_i2c bus on
Orange Pi PC, then set the power supply of the ARM cores to this
regulator, in order to enable DVFS.

Signed-off-by: Ondrej Jirman <redacted>
[Icenowy: Enable DVFS in this patch, slight changes and change commit
 message]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 998b60f8d295..d855f8b6254e 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -98,6 +98,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_sy8106a>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -160,6 +164,21 @@
 	};
 };
 
+&r_i2c {
+	status = "okay";
+
+	reg_sy8106a: regulator at 65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &r_pio {
 	leds_r_opc: led_pins at 0 {
 		pins = "PL10";
-- 
2.13.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help