[PATCH] mmc: mediatek: add ops->get_cd() support
From: Ulf Hansson <hidden>
Date: 2017-07-11 14:44:02
Also in:
linux-mediatek, linux-mmc, lkml
On 3 July 2017 at 08:24, Chaotian Jing [off-list ref] wrote:
if user plug out sd card slowly, finally card is plugged out but cat /proc/partitions can find that card is still exist in kernel. that's because alougth get card detect interrupt but CMD13 still can get correct response(all other pins are connected expect card detect pin). add ops->get_cd() can avoid this issue. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Thanks, applied for next! Kind regards Uffe
quoted hunk ↗ jump to hunk
--- drivers/mmc/host/mtk-sd.c | 1 + 1 file changed, 1 insertion(+)diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 5c1e178..975c765 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c@@ -1585,6 +1585,7 @@ static void msdc_hw_reset(struct mmc_host *mmc) .request = msdc_ops_request, .set_ios = msdc_ops_set_ios, .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, .start_signal_voltage_switch = msdc_ops_switch_volt, .card_busy = msdc_card_busy, .execute_tuning = msdc_execute_tuning, --1.8.1.1.dirty